ANSI Standard Pump Dimensions-manufacture,factory,supplier from China

1. The 3196 ANSI Series is available in a wide range of sizes, capacities and materials to fit virtually any process-fluid application.

Mark III is diagnosed global as the surest name in ANSI chemical process pumps.

Every day in over 500,000 installations, 3196 ASME/ANSI (B73.1M) process pump proves why it’s the industry standard for performance.

Features and benefitsDecrease total cost of possession from reverse vane impeller, which eases upkeep and provides renewable, excessive-performance performance over the pump's life.Multiplied reliability and mechanical seal existence due to an appropriate seal surroundings created through the sealsentry seal chamber.Ease of maintenance attributable to ideal, predictable seal chamber pressures that are re-hooked up after every impeller placing.Prolonged mechanical seal and bearing life thru strong shaft and bearing designs that still reduce shaft deflection.Speedy and correct impeller placi

Proven PerformanceEvery day in over 500,000 installations, the 3196 ASME/ANSI (B73.1M) process pump proves why it’s the industry standard for performance.

Conforming to ASME (ANSI) B73.1, Mark 3 pumps include many proven reliability- and overall performance-enhancing features. They're to be had in a huge range of configurations, which include mechanically sealed, dynamically sealed, sealless magnetically pushed, low-waft, self-priming and recessed impeller. It presents flexibility and breadth of pumping solutions in limitless applications.GENERAL DESCRIPTION OF PUMPThe Mark III chemical process pump is a horizontal, end suction, single stage, centerline discharge, centrifugal pump.

Proven PerformanceOver One Million Process Pump Installations WorldwideWhen the 3196 ANSI Standard Dimension Process Pump was first introduced in 1961, it immediately became the standard for the industry. Today, the number of installations attest to its remarkable performance.

Decrease overall cost of possession from opposite vane impeller, which eases protection and presents renewable, high-efficiency performance over the pumps' life.Increased reliability and mechanical seal existence because of the correct seal environment created through the sealsentry seal chamber.Ease of preservation as a result of most appropriate, predictable seal chamber pressures which are re-installed after each impeller putting.START-UP CONSIDERATIONSENSURING PROPER NPSHANet Positive Suction Head – Available (NPSHA) is the measure of the energy in a liquid above the vapor pressure.

Centrifugal Pump. • Model 3196. • S/N 788B861. • Size 1 in. x1-1/2 in. x 8 in. • Water flush double mechanical seals. Motor 1.5 hp, 1,730 rpm, 230/460 V, 60 Hz, 5.6/2,8 amps, 3 phase, Capacity 14 gpm. • Overall Dimensions 35 in. L x 12 in. W x 15 in.

The 3196 ansi series is to be had in a huge range of sizes and capacities to match clearly any method-fluid software.Utility: Chemical processingGeneral industriesMiningWater sourcesEnergy technologyPrimary metalsPulp and paperOil and gasolineCapacities to 7000 GPM (1590 m³ /h)Heads to 730 feet (223 m)Temperatures to 700° F (371° C)Pressures to 375 PSIG (26 bar)Available Size:6''-15''Part NameMaterialDuctile Iron316SSCD4MCuAlloy 20NickelHastelloy CTitaniumCasing316SSCD4MCuAlloy 20NickelHastelloy CTitaniumImpeller316SSCD4MCuAlloy 20NickelHastelloy CTitaniumCover316SSCD4MCuA

Material selection:Our standard Duplex stainless steel ASTM A890 Grade 3A is stronger, harder and has higher pitting corrosion resistance than stainless steel which is conventionally used for double suction pumps.Packings:Split stuffing box gland and lantern ring assure quick and easy change of packings.Packings with or without external or internal sealing liquid provide flexibility according to application.Mechanical seals:Different mechanical seals available.Seals fit into the same chamber as packingsproviding easier change-over to another type of sealing. 

Chemical Process PumpsDesigned for Total Range ofIndustry ServicesI Capacities to 7000 GPM (1364 m 3 /h)I Heads to 730 feet (223 m)I Temperatures to 700°F (371° C)I Pressures to 375 PSIG (2586 kPa)Product Description:The 3196 ANSI series is to be had in a huge variety of sizes, capacities and materials to match virtually any system-fluid utility.ImpellerDesigned for long-term, maintainable performance and minimum hydraulic loads formaximum reliability.CASING• Top centerline discharge for air handling, self-venting.• Class 150 pumps have Class 300 wall thickness as standard.• Back pull-out desi

When the 3196 ANSI Pump was first introduced in 1961, it immediately became the standard in the industry.  Today, the number of installations attest to its remarkable performance.  Users in chemical, petrochemical, pulp & paper, primary metals, food & beverage and general industries know they can make no better choice than the best.1. Application: Chemical ProcessingGeneral IndustriesMiningWater ResourcesPower GenerationPrimary MetalsPulp and PaperOil and Gas2.Capacities to 7000 GPM (1590 m³ /h)Heads to 730 feet (223 m)Temperatures to 700° F (371° C)Pressures to 375

High performance process pumps for demanding applicationsAPP/T end-suction single-stage centrifugal process pumps are used for demanding industrial applications to ensure process reliability, high efficiency and low operating costs.Main benefits：Long and trusted experience in all industrial segmentsExcellent performanceExceeds standard requirements of international ISO 5199 and ISO 2858 standardsSuitable for the most demanding industrial applicationsUnique, patented and superior design features minimize life cycle costsQuick and easy installation, safe operation, easy maintenance and serviceMa

Mark III is recognized international as the most suitable name in ANSI chemical method pumps.

The 3196 ANSI collection is to be had in a wide variety of sizes, capacities and substances to match absolutely any technique-fluid application.RECEIVING THE PUMPInspect the pump as soon as it is received. Carefully check that everything is in good order. Make notes of damaged or missing items on the receipt and freight bill. File any claims with the transportation company as soon as possible.STORAGE REQUIREMENTSShort Term: (Less than 6 months) normal packaging procedure is designed to protect the pump during shipping.

Mark III is identified worldwide because the most advantageous name in ansi chemical procedure pumps.

Conforming to ASME (ANSI) B73.1, Mark 3 pumps incorporate many proven reliability- and performance-enhancing features. They are available in a wide range of configurations, including mechanically sealed, dynamically sealed, sealless magnetically driven, low-flow, self-priming and recessed impeller.

Conforming to ASME(ANSI) B73.1, the Mark 3 chemical process pump provides outstanding hydraulic performanceand many proven reliability- and performance-enhancing features. And it is recognized international as the most suitable name in ANSI chemical method pumps.1.Application: Chemical ProcessingGeneral IndustriesMiningWater ResourcesPower GenerationPrimary MetalsPulp and PaperOil and Gas2.Capacities to 7000 GPM (1590 m³ /h)Heads to 730 feet (223 m)Temperatures to 700° F (371° C)Pressures to 375 PSIG (26 bar)3.Available Size:6''-16''

Absolutely open impeller is the first-class layout for the chemical process industries services. Ideally fitted for corrosives and abrasives, handles solids and stringy fibers simply. Lets in for easy healing of clearances while wear takes place. Lower back pump-out vanes reduce stress at the shaft seal, reduce axial thrust at the bearings.Our seal chambers permit seals to run cooler with better face lubrication. Keep solids, air and vapors faraway from the seal faces for prolonged seal lifestyles.Our electricity ends design maximizes reliability and mean time among failure (mtbf).

Our seal chambers permit seals to run cooler with higher face lubrication.

Conforming to ASME (ANSI) B73.1, Mark 3 pumps incorporate many proven reliability- and performance-enhancing functions. They're available in a wide range of configurations, which includes routinely sealed, dynamically sealed, sealless magnetically pushed, low-waft, self-priming and recessed impeller.

Fully open impeller is the excellent design for the chemical manner industries services. Ideally suited for corrosives and abrasives, handles solids and stringy fibers conveniently. Permits for simple recuperation of clearances while wear takes area.

Safety•  ANSI B15.1 coupling protect•  Ductile iron body adapterFirst rate capabilities for top notch performanceProlonged pump existenceEase of protection•  Lower back pull-out layout•  External impeller adjustment•  Most interchangeabilityMost fulfilling hydraulic performance•  Absolutely open impeller•  Complete 50/60 hz coverage•  29 sizes•  automatic pump choiceThe 3196 ANSI Series is available in a wide range of sizes, capacities and materials to fit virtually any process-fluid application.Part NameMaterialDuctile Iron316SSCD4MCuAlloy 20Nickel