NPP Pump-manufacture,factory,supplier from China

Npp/npt hydraulic layout non-clogging design passes massive particles and long fibers, e.g.

Non-clogging design passes big  particles and long fibers, e.g.  plastic stripes. Specially designed vane edges  stay clean. Front vanes with sideplate cutting grooves keep  gap clean. Back vanes prohibit  particles from entering  the seal cavity and balance  axial forces. Liquids: sludges, waste waters, effluents.A double volute casing in larger pumps reduces radial forces and shaft deflection.

Operating data:Capacities 2,000 m 3 /h / 8,800 USgpmHeads 90 m / 295 ftTemperatures 180°C / 356°FFrequencies 50 or 60 HzPressures 16 bar / 230 psi depending on material and sizeService Solutions To maintain and improve the high  performance of AHLSTAR™ process  pumps, customers can select from a  wide range of available service solutions.

The Process Pumps are meant for pumping all kinds of liquids from clean waters to abrasive or corrosive liquids.Special capabilities to handle stocks of various kinds, sludges or slurries.End suction single stage pumps• Reliable operation• Simple but versatile construction• High efficiencyThe  Process Pump is designed for continuous operation in industrial processes• Oil and Gas• Hydrocarbon Processing• Pulp and Paper• Power Generation• Water Transport and Distribution• Food• Basic Metals• Fertilizers• Others

Our pumps have been designed to meet the most demanding hydraulic coverage requirements and for all types of liquid, making it the ideal range for challenging pumping operations. Has been designed in accordance with ISO 5199and ISO 2858 international standards, and has been even further developed to surpass market standards andensure excellent performance and reliability1.Our non-blocking pump used for blocking or abrasion occasion that ordinary slurry  pump not available.2.Performance(Max parameter)Heads 90mCapacity 550l/s  Temperature 180℃

Non-clogging method pumps are the right answers whilst the liquid contains huge or long particles.NPP/NPT Hydraulic Design Non-clogging design passes big particles and long fibers, e.g.

The product line offers a wide range of hydraulic sizes to guarantee minimum power consumption. Pump hydraulics, casings and impellers are designed to optimize fluid handling capabilities. Stocks are pumped like water. Particles in sludges do not accumulate in the pump, or slurries are effectively channeled so as not to cause wear.The back vanes of the impeller keep the area between the impeller and the casing cover clean, and reduce the axial load on the bearings.Balance holes in the impeller are used to stabilize the pressure in the seal chamber.

The ahlstar product line offers a extensive variety of hydraulic sizes to guarantee minimal power intake. Pump hydraulics, casings and impellers are designed to optimize fluid handling abilties. shares are pumped like water. debris in sludges do no longer collect inside the pump, or slurries are efficaciously channeled in order not to cause wear.The back vanes of the impeller keep  the area between the impeller and the  casing cover clean, and reduce the  axial load on the bearings.

1.Our non-blocking pump used for blocking or abrasion event that regular slurry  pump now not available.2.Performance(max parameter)Heads 90mAbility 550l/s  Temperature one hundred eighty℃

1.Our pump broadly used for all conventional pumping event in pulp and paper mills. the precise design of app pump, make the pumping slurry easy like water, slurry density can attain 8%.2.Overall performance(max parameter)Heads 160mCapability 2000l/sTemperature 180℃3.To be had size:32-600

Centrifugal Pump. • Model 3196. • S/N 788B861. • Size 1 in. x1-1/2 in. x 8 in. • Water flush double mechanical seals. Motor 1.5 hp, 1,730 rpm, 230/460 V, 60 Hz, 5.6/2,8 amps, 3 phase, Capacity 14 gpm. • Overall Dimensions 35 in. L x 12 in. W x 15 in.

 Zpp Pump's core is flow control and applicators.

Operating data:Capacities 6,100 m 3 /h / 26,860 USgpmHeads 160 m / 525 ftTemperatures 210°C / 410°FFrequencies 50 or 60 HzPressures 25 bar / 360 psiThe product line offers a large form of hydraulic sizes to guarantee minimal power intake. Pump hydraulics, casings and impellers are designed to optimize fluid handling abilities. stocks are pumped like water.

1.Our pump widely used for all conventional pumping occasion in pulp and paper mills. The unique design of APP pump, make the pumping slurry easy like water, slurry density can reach 8%.2. Performance(Max parameter)Heads 160mCapacity 2000l/sTemperature 180℃3.Available size:32-600

The Mark III chemical process pump is a horizontal, cease suction, unmarried degree, centerline discharge, centrifugal pump.

Our Pump substitute components are reliable, cost effective replacement elements which might be interchangeable with durco etc widely known pump manufacturers.We manufacture more than a few substitute parts including shafts, casings, impellers, stuffing container covers, sleeves, labyrinth seals, repellers, backplates, fans and plenty of more.MAINTENANCEPREVENTIVE MAINTENANCEA procedure for keeping accurate maintenance records is a critical part of any program to improve pump reliability. There are many variables that can contribute to pump failures.

ZPP Double Suction Pumps：Reliable OperationHigh EfficiencyWide Hydraulic Coverage1.Our slurry tank flushing pump particularly design for present day high-pace paper device, board gadget and additionally very applicable for different huge ability pumping event.2.Overall performance(max parameter)Heads 130mPotential 6500l/s  temperature 120℃

Prolonged mechanical seal and bearing lifestyles through strong shaft and bearing designs that still limit shaft deflection.Rapid and accurate impeller placing with the industry's maximum revolutionary external impeller adjustment mechanism.In-keep reverse vane impeller adjustment with the most effective pump that takes full gain of the again pull-out design.STARTING THE PUMP AND ADJUSTING FLOW1. Open the suction valve to full open position. It is very important to leave the suction valve open while the pump is operating.

1.Our wear pump used for corrosion and  abrasion pumping occasion. Also well used for  anti-blocking occasion.2.Performance(Max parameter)Heads 110m Capacity 2000l/s     Temperature 180℃

Proven PerformanceOver One Million Process Pump Installations WorldwideWhen the 3196 ANSI Standard Dimension Process Pump was first introduced in 1961, it immediately became the standard for the industry. Today, the number of installations attest to its remarkable performance.

1.High pumping performance comes as a result of the availability, reliability and quality of the correct pump. Genuine spare parts and proper maintenanceensure the high performance of our process pumps in complex production operations.Our pump widely used for all conventional pumping occasion in pulp and paper mills. The unique design of APP pump, make the pumping slurry easy like water, slurry density can reach 8%. 2. Performance(Max parameter)Heads 160mCapacity 2000l/sTemperature 180℃3.Available size:32-600

Between bearings, single stage, axially split, double entrySuitable for general industrial pumping as well as low pulsation headbox applications in PPI with highly polished internal surfacesOverall performance varietySulzer pumps gives correct coverage with many pump sizes for low and high head applications with high efficienciePerformance  Capacity max.                            6500 l/s                        103000 USGPM  Head max.

We provide innovative pumping solutions to business partners in the following industries:• Oil and Gas• Hydrocarbon Processing• Pulp and Paper• Power Generation• General Industry• Chemical Process Industry• Watera.Closed Impelleris used for pumping clean liquids or liquids containing some impurities.For pump types:APPEPPb.Open Impelleris designed for liquids containing solid particles, abrasive liquids or stock up to 8 % consistency.For pump types:APPARPASPEPPc.Special Open Impelleris suitable for liquids containing larger solid particles and long fibers, abrasive liquids or stock up to 8 % co

Drillings in PumpEmptying holes• Casing• Dynamic seal• S version casing for vacuum pump• R version stuffing box housingTemperature measurement connections• Casing cover• Dynamic seal housing• S pump casing for vacuum pump• R pump stuffing box housingSurface TreatmentPainting• EN ISO12944• Thickness 200 µm• Epoxy max. 150 oC / 300 oF• Silicon aluminum and epoxy above 150 oC / 300 oF• Base also available with zinc epoxyGrinding• Interior surfaces- Ra 6.3- Cotton ball• Open impellers only• Sandblasting also availableWashingSpecial care is taken to ensure the cleanliness of the pump.