Sulzer Pump Selection-manufacture,factory,supplier from China

Operating data:Capacities 7,000 m 3 /h / 31,000 USgpmHeads 110 m / 360 ft   Temperatures 180°C / 356°FFrequencies 50 or 60 HzPressures 16 bar / 230 psi depending on material and sizeTo ensure maximum reliability in opposition to corrosion we provide material choice alternatives from our very own metallic foundries.All parts in contact with the pumped liquid can be constructed from the equal creation material because the pump casing.

The LF3196 process pump line is specifically designed to provide superior performance for low flow services of the Chemical Process Industries.1. Application: Chemical ProcessingGeneral IndustriesMiningWater ResourcesPower GenerationPrimary MetalsPulp and PaperOil and Gas2.Capacities to 220 GPM (50 m3/h)N Heads to 925 feet (282 m)N Temperatures to 700° F (371° C)N Pressures to 450 PSIG (3102 kPa) 3. Available Size:8’’-13’’ 4.Radial vane impeller5.CASING#150RF/#300RF flange6.Seal ChamberStandard bore and big bore 

Between bearings, single stage, axially split, double entrySuitable for general industrial pumping as well as low pulsation headbox applications in PPI with highly polished internal surfacesOverall performance varietySulzer pumps gives correct coverage with many pump sizes for low and high head applications with high efficienciePerformance  Capacity max.                            6500 l/s                        103000 USGPM  Head max.

Our Pump substitute components are reliable, cost effective replacement elements which might be interchangeable with durco etc widely known pump manufacturers.We manufacture more than a few substitute parts including shafts, casings, impellers, stuffing container covers, sleeves, labyrinth seals, repellers, backplates, fans and plenty of more.MAINTENANCEPREVENTIVE MAINTENANCEA procedure for keeping accurate maintenance records is a critical part of any program to improve pump reliability. There are many variables that can contribute to pump failures.

1.Our pump widely used for all conventional pumping occasion in pulp and paper mills. The unique design of APP pump, make the pumping slurry easy like water, slurry density can reach 8%.2. Performance(Max parameter)Heads 160mCapacity 2000l/sTemperature 180℃3.Available size:32-600

1.Our pump broadly used for all conventional pumping event in pulp and paper mills. the precise design of app pump, make the pumping slurry easy like water, slurry density can attain 8%.2.Overall performance(max parameter)Heads 160mCapability 2000l/sTemperature 180℃3.To be had size:32-600

Centrifugal Pump. • Model 3196. • S/N 788B861. • Size 1 in. x1-1/2 in. x 8 in. • Water flush double mechanical seals. Motor 1.5 hp, 1,730 rpm, 230/460 V, 60 Hz, 5.6/2,8 amps, 3 phase, Capacity 14 gpm. • Overall Dimensions 35 in. L x 12 in. W x 15 in.

The product line offers a wide range of hydraulic sizes to guarantee minimum power consumption. Pump hydraulics, casings and impellers are designed to optimize fluid handling capabilities. Stocks are pumped like water. Particles in sludges do not accumulate in the pump, or slurries are effectively channeled so as not to cause wear.The back vanes of the impeller keep the area between the impeller and the casing cover clean, and reduce the axial load on the bearings.Balance holes in the impeller are used to stabilize the pressure in the seal chamber.

The ahlstar product line offers a extensive variety of hydraulic sizes to guarantee minimal power intake. Pump hydraulics, casings and impellers are designed to optimize fluid handling abilties. shares are pumped like water. debris in sludges do no longer collect inside the pump, or slurries are efficaciously channeled in order not to cause wear.The back vanes of the impeller keep  the area between the impeller and the  casing cover clean, and reduce the  axial load on the bearings.

The mark III chemical technique pump is a horizontal, give up suction, unmarried level, centerline discharge, centrifugal pump.

Ahlstar app/t stop-suction unmarried-stage centrifugal process pumps are used for annoying business programs to make sure process reliability, excessive efficiency and occasional running costs.Excessive overall performance manner pumps for stressful packagesVersatile Solutions for Degassing ApplicationsPositive Inlet HeadWhen pumping gas containing liquids in unstable inlet head applications, the AHLSTAR pump with LM integrated liquid ring pump degassing unit secures reliable pumping.• Single mechanical seal with recirculation flushing for clean liquids.• Single mechanical seal with extern

Quick and Easy Installation ConceptThe rigid, distortion-free, hot-dip galvanized baseplate is easy to install and grout into the concrete foundation. With various installation options, the pump helps minimize the  life-cycle costs.1.The optimized frame size and standardization reduces concrete needs up to 30 %.

High pumping performance comes as a stop end result of the supply, reliability and nice of the right pump. Right spare parts and proper safety Make certain the excessive typical performance of  pumps in complicated production operations.We aid our clients with an huge form of pumping offerings, from spare elements to far flung monitoring.

1.Our non-blocking pump used for blocking or abrasion event that regular slurry  pump now not available.2.Performance(max parameter)Heads 90mAbility 550l/s  Temperature one hundred eighty℃

All stainless-steel structures for extraordinarily corrosive situations. all parts inclusive of the adapter and bearing unit are manufactured from chrome steel.Moreover, stainless steel may be selected for the bearing unit auxiliary device to offer longer working lifestyles in corrosive surroundings.1.Our wear pump used for corrosion and  abrasion pumping occasion.

 Zpp Pump's core is flow control and applicators.

We help our customers with an  big range of pumping offerings,  from spare components to faraway monitoring. additionally we offer various types  of service agreements wherein spare  components and carrier answers can be  mixed.1.Our wear pump used for corrosion and  abrasion pumping occasion. Also well used for  anti-blocking occasion.2.Performance(Max parameter)Heads 110mCapacity 2000l/s     Temperature 180℃All parts in contact with the pumped liquid can be produced from the same construction material as the pump casing.

ZPP Double Suction Pumps：Reliable OperationHigh EfficiencyWide Hydraulic Coverage1.Our slurry tank flushing pump particularly design for present day high-pace paper device, board gadget and additionally very applicable for different huge ability pumping event.2.Overall performance(max parameter)Heads 130mPotential 6500l/s  temperature 120℃

The Mark III chemical process pump is a horizontal, cease suction, unmarried degree, centerline discharge, centrifugal pump.

1.Our wear pump used for corrosion and  abrasion pumping occasion. Also well used for  anti-blocking occasion.2.Performance(Max parameter)Heads 110m Capacity 2000l/s     Temperature 180℃

The mark 3 chemical system pump presents high-quality hydraulic overall performance, unrivaled reliability and coffee overall price of possession.

Our pumps have been designed to meet the most demanding hydraulic coverage requirements and for all types of liquid, making it the ideal range for challenging pumping operations. Has been designed in accordance with ISO 5199and ISO 2858 international standards, and has been even further developed to surpass market standards andensure excellent performance and reliability1.Our non-blocking pump used for blocking or abrasion occasion that ordinary slurry  pump not available.2.Performance(Max parameter)Heads 90mCapacity 550l/s  Temperature 180℃

Proven PerformanceEvery day in over 500,000 installations, the 3196 ASME/ANSI (B73.1M) process pump proves why it’s the industry standard for performance.

Drillings in PumpEmptying holes• Casing• Dynamic seal• S version casing for vacuum pump• R version stuffing box housingTemperature measurement connections• Casing cover• Dynamic seal housing• S pump casing for vacuum pump• R pump stuffing box housingSurface TreatmentPainting• EN ISO12944• Thickness 200 µm• Epoxy max. 150 oC / 300 oF• Silicon aluminum and epoxy above 150 oC / 300 oF• Base also available with zinc epoxyGrinding• Interior surfaces- Ra 6.3- Cotton ball• Open impellers only• Sandblasting also availableWashingSpecial care is taken to ensure the cleanliness of the pump.