Sulzer Pump Data Sheet-manufacture,factory,supplier from China

The Mark III chemical process pump is a horizontal, cease suction, unmarried degree, centerline discharge, centrifugal pump.

1.Our pump widely used for all conventional pumping occasion in pulp and paper mills. The unique design of APP pump, make the pumping slurry easy like water, slurry density can reach 8%.2. Performance(Max parameter)Heads 160mCapacity 2000l/sTemperature 180℃3.Available size:32-600

1.Our pump broadly used for all conventional pumping event in pulp and paper mills. the precise design of app pump, make the pumping slurry easy like water, slurry density can attain 8%.2.Overall performance(max parameter)Heads 160mCapability 2000l/sTemperature 180℃3.To be had size:32-600

 Zpp Pump's core is flow control and applicators.

The Mark III chemical process pump is a horizontal, end suction, single level, centerline discharge, centrifugal pump.

Drillings in PumpEmptying holes• Casing• Dynamic seal• S version casing for vacuum pump• R version stuffing box housingTemperature measurement connections• Casing cover• Dynamic seal housing• S pump casing for vacuum pump• R pump stuffing box housingSurface TreatmentPainting• EN ISO12944• Thickness 200 µm• Epoxy max. 150 oC / 300 oF• Silicon aluminum and epoxy above 150 oC / 300 oF• Base also available with zinc epoxyGrinding• Interior surfaces- Ra 6.3- Cotton ball• Open impellers only• Sandblasting also availableWashingSpecial care is taken to ensure the cleanliness of the pump.

Reliable OperationHigh Efficiency Wide Hydraulic CoverageBetween bearings, unmarried level, axially cut up, double access appropriate for fashionable business pumping in addition to low pulsation headbox packages in ppi with notably polished inner surfaces.Overall performance varietySulzer pumps gives correct coverage with many pump sizes for low and high head applications with high efficienciePerformance  Capacity max.

Our pumps have been designed to meet the most demanding hydraulic coverage requirements and for all types of liquid, making it the ideal range for challenging pumping operations. Has been designed in accordance with ISO 5199and ISO 2858 international standards, and has been even further developed to surpass market standards andensure excellent performance and reliability1.Our non-blocking pump used for blocking or abrasion occasion that ordinary slurry  pump not available.2.Performance(Max parameter)Heads 90mCapacity 550l/s  Temperature 180℃

Our Pump substitute components are reliable, cost effective replacement elements which might be interchangeable with durco etc widely known pump manufacturers.We manufacture more than a few substitute parts including shafts, casings, impellers, stuffing container covers, sleeves, labyrinth seals, repellers, backplates, fans and plenty of more.MAINTENANCEPREVENTIVE MAINTENANCEA procedure for keeping accurate maintenance records is a critical part of any program to improve pump reliability. There are many variables that can contribute to pump failures.

ZPP Designation & Description:Between bearings, single stage, axially split, double entrySulzer designation yy-zzz ZPPSuitable for general industrial pumping as well as low pulsation headbox applications in PPI with highly polished internal surfaces.ZPP Double Suction PumpsPerformance RangeZPP Pumps offers good coverage with many pump sizes for low and high head applications with high efficiencies.

We provide innovative pumping solutions to business partners in the following industries:• Oil and Gas• Hydrocarbon Processing• Pulp and Paper• Power Generation• General Industry• Chemical Process Industry• Watera.Closed Impelleris used for pumping clean liquids or liquids containing some impurities.For pump types:APPEPPb.Open Impelleris designed for liquids containing solid particles, abrasive liquids or stock up to 8 % consistency.For pump types:APPARPASPEPPc.Special Open Impelleris suitable for liquids containing larger solid particles and long fibers, abrasive liquids or stock up to 8 % co

The mark III chemical technique pump is a horizontal, give up suction, unmarried level, centerline discharge, centrifugal pump.

The product line offers a wide range of hydraulic sizes to guarantee minimum power consumption. Pump hydraulics, casings and impellers are designed to optimize fluid handling capabilities. Stocks are pumped like water. Particles in sludges do not accumulate in the pump, or slurries are effectively channeled so as not to cause wear.The back vanes of the impeller keep the area between the impeller and the casing cover clean, and reduce the axial load on the bearings.Balance holes in the impeller are used to stabilize the pressure in the seal chamber.

Our pump replacement parts are reliable, fee powerful alternative elements which are interchangeable with many widely known pump brands.We manufacture a range of replacement parts which include shafts, casings, impellers, stuffing box covers, sleeves, labyrinth seals, repellers, backplates, followers and lots of greater.MISCELLANEOUS INFORMATIONThere are two basic repeller configurations, one to accommodate only positive suction heads of fairly large magnitude and another dual head repeller that will accommodate suction heads that may be negative as well as positive; while the pump is in oper

The ahlstar product line offers a extensive variety of hydraulic sizes to guarantee minimal power intake. Pump hydraulics, casings and impellers are designed to optimize fluid handling abilties. shares are pumped like water. debris in sludges do no longer collect inside the pump, or slurries are efficaciously channeled in order not to cause wear.The back vanes of the impeller keep  the area between the impeller and the  casing cover clean, and reduce the  axial load on the bearings.

Prolonged mechanical seal and bearing lifestyles through strong shaft and bearing designs that still limit shaft deflection.Rapid and accurate impeller placing with the industry's maximum revolutionary external impeller adjustment mechanism.In-keep reverse vane impeller adjustment with the most effective pump that takes full gain of the again pull-out design.STARTING THE PUMP AND ADJUSTING FLOW1. Open the suction valve to full open position. It is very important to leave the suction valve open while the pump is operating.

1.Our non-blocking pump used for blocking or abrasion event that regular slurry  pump now not available.2.Performance(max parameter)Heads 90mAbility 550l/s  Temperature one hundred eighty℃

Ahlstar app/t stop-suction unmarried-stage centrifugal process pumps are used for annoying business programs to make sure process reliability, excessive efficiency and occasional running costs.Excessive overall performance manner pumps for stressful packagesVersatile Solutions for Degassing ApplicationsPositive Inlet HeadWhen pumping gas containing liquids in unstable inlet head applications, the AHLSTAR pump with LM integrated liquid ring pump degassing unit secures reliable pumping.• Single mechanical seal with recirculation flushing for clean liquids.• Single mechanical seal with extern

Quick and Easy Installation ConceptThe rigid, distortion-free, hot-dip galvanized baseplate is easy to install and grout into the concrete foundation. With various installation options, the pump helps minimize the  life-cycle costs.1.The optimized frame size and standardization reduces concrete needs up to 30 %.

All stainless-steel structures for extraordinarily corrosive situations. all parts inclusive of the adapter and bearing unit are manufactured from chrome steel.Moreover, stainless steel may be selected for the bearing unit auxiliary device to offer longer working lifestyles in corrosive surroundings.1.Our wear pump used for corrosion and  abrasion pumping occasion.

1.High pumping performance comes as a result of the availability, reliability and quality of the correct pump. Genuine spare parts and proper maintenanceensure the high performance of our process pumps in complex production operations.Our pump widely used for all conventional pumping occasion in pulp and paper mills. The unique design of APP pump, make the pumping slurry easy like water, slurry density can reach 8%. 2. Performance(Max parameter)Heads 160mCapacity 2000l/sTemperature 180℃3.Available size:32-600

1.Our wear pump used for corrosion and  abrasion pumping occasion. Also well used for  anti-blocking occasion.2.Performance(Max parameter)Heads 110m Capacity 2000l/s     Temperature 180℃

Operating data:Capacities 6,100 m 3 /h / 26,860 USgpmHeads 160 m / 525 ftTemperatures 210°C / 410°FFrequencies 50 or 60 HzPressures 25 bar / 360 psiThe product line offers a large form of hydraulic sizes to guarantee minimal power intake. Pump hydraulics, casings and impellers are designed to optimize fluid handling abilities. stocks are pumped like water.

Centrifugal Pump. • Model 3196. • S/N 788B861. • Size 1 in. x1-1/2 in. x 8 in. • Water flush double mechanical seals. Motor 1.5 hp, 1,730 rpm, 230/460 V, 60 Hz, 5.6/2,8 amps, 3 phase, Capacity 14 gpm. • Overall Dimensions 35 in. L x 12 in. W x 15 in.