Sulzer zpp pump-manufacture,factory,supplier from China

Reliable OperationHigh Efficiency Wide Hydraulic CoverageMechanical sealsDifferent mechanical seals available.

Mechanical sealsDifferent mechanical seals available.

ZPP Designation & Description:Between bearings, single stage, axially split, double entrySulzer designation yy-zzz ZPPSuitable for general industrial pumping as well as low pulsation headbox applications in PPI with highly polished internal surfaces.ZPP Double Suction PumpsPerformance RangeZPP Pumps offers good coverage with many pump sizes for low and high head applications with high efficiencies.

 Zpp Pump's core is flow control and applicators.

ZPP Double Suction Pumps：Reliable OperationHigh EfficiencyWide Hydraulic Coverage1.Our slurry tank flushing pump particularly design for present day high-pace paper device, board gadget and additionally very applicable for different huge ability pumping event.2.Overall performance(max parameter)Heads 130mPotential 6500l/s  temperature 120℃

Material selection:Our standard Duplex stainless steel ASTM A890 Grade 3A is stronger, harder and has higher pitting corrosion resistance than stainless steel which is conventionally used for double suction pumps.Packings:Split stuffing box gland and lantern ring assure quick and easy change of packings.Packings with or without external or internal sealing liquid provide flexibility according to application.Mechanical seals:Different mechanical seals available.Seals fit into the same chamber as packingsproviding easier change-over to another type of sealing. 

Between bearings, single stage, axially split, double entrySuitable for general industrial pumping as well as low pulsation headbox applications in PPI with highly polished internal surfacesOverall performance varietySulzer pumps gives correct coverage with many pump sizes for low and high head applications with high efficienciePerformance  Capacity max.                            6500 l/s                        103000 USGPM  Head max.

1.Our slurry tank flushing pump specially design for current high-speed paper machine, board machine and also very applicable for other huge capacity pumping occasion.2.Performance(Max parameter)Heads 130mCapacity 6500l/s  Temperature 120℃

Reliable OperationHigh Efficiency Wide Hydraulic CoverageBetween bearings, unmarried level, axially cut up, double access appropriate for fashionable business pumping in addition to low pulsation headbox packages in ppi with notably polished inner surfaces.Overall performance varietySulzer pumps gives correct coverage with many pump sizes for low and high head applications with high efficienciePerformance  Capacity max.

All chrome steel systems for tremendously corrosive conditions.

Predominant benefits：Lengthy and relied on enjoy in all commercial segmentsExceptional overall performanceExceeds fashionable necessities of worldwide iso 5199 and iso 2858 standardsSuitable for the maximum stressful business programsPrecise, patented and superior design features limit life cycle pricesQuick and clean installation, safe operation, smooth preservation and serviceMajor programsSmooth and lightly contaminated liquidsViscous liquidsFibrous slurriesMassive solids containing beveragesFuel containing beverages and self-priming packagesPredominant design featuresFlexible, dependable,

We could copy parts as per your various kinds of drawings and needs.

1.Our pump broadly used for all conventional pumping event in pulp and paper mills. the precise design of app pump, make the pumping slurry easy like water, slurry density can attain 8%.2.Overall performance(max parameter)Heads 160mCapability 2000l/sTemperature 180℃3.To be had size:32-600

Centrifugal Pump. • Model 3196. • S/N 788B861. • Size 1 in. x1-1/2 in. x 8 in. • Water flush double mechanical seals. Motor 1.5 hp, 1,730 rpm, 230/460 V, 60 Hz, 5.6/2,8 amps, 3 phase, Capacity 14 gpm. • Overall Dimensions 35 in. L x 12 in. W x 15 in.

The product line offers a wide range of hydraulic sizes to guarantee minimum power consumption. Pump hydraulics, casings and impellers are designed to optimize fluid handling capabilities. Stocks are pumped like water. Particles in sludges do not accumulate in the pump, or slurries are effectively channeled so as not to cause wear.The back vanes of the impeller keep the area between the impeller and the casing cover clean, and reduce the axial load on the bearings.Balance holes in the impeller are used to stabilize the pressure in the seal chamber.

Quick and Easy Installation ConceptThe rigid, distortion-free, hot-dip galvanized baseplate is easy to install and grout into the concrete foundation. With various installation options, the pump helps minimize the  life-cycle costs.1.The optimized frame size and standardization reduces concrete needs up to 30 %.

Ahlstar app/t stop-suction unmarried-stage centrifugal process pumps are used for annoying business programs to make sure process reliability, excessive efficiency and occasional running costs.Excessive overall performance manner pumps for stressful packagesVersatile Solutions for Degassing ApplicationsPositive Inlet HeadWhen pumping gas containing liquids in unstable inlet head applications, the AHLSTAR pump with LM integrated liquid ring pump degassing unit secures reliable pumping.• Single mechanical seal with recirculation flushing for clean liquids.• Single mechanical seal with extern

Our Pump substitute components are reliable, cost effective replacement elements which might be interchangeable with durco etc widely known pump manufacturers.We manufacture more than a few substitute parts including shafts, casings, impellers, stuffing container covers, sleeves, labyrinth seals, repellers, backplates, fans and plenty of more.MAINTENANCEPREVENTIVE MAINTENANCEA procedure for keeping accurate maintenance records is a critical part of any program to improve pump reliability. There are many variables that can contribute to pump failures.

Applications:The Process Pump is designed for continuous operation in industrial processes.• Oil and Gas• Hydrocarbon Processing• Pulp and Paper• Power Generation• Water Transport and Distribution• Food• Basic Metals• Fertilizers• OthersThe Process Pumps are meant for pumping all kinds of  liquids from clean waters to abrasive or corrosive liquids.Special capabilities to handle stocks of various kinds, sludges or slurries.End suction single stage pumps• Reliable operation• Simple but versatile construction• High efficiency

1.Our wear pump used for corrosion and  abrasion pumping occasion. Also well used for  anti-blocking occasion.2.Performance(Max parameter)Heads 110m Capacity 2000l/s     Temperature 180℃

Our pumps have been designed to meet the most demanding hydraulic coverage requirements and for all types of liquid, making it the ideal range for challenging pumping operations. Has been designed in accordance with ISO 5199and ISO 2858 international standards, and has been even further developed to surpass market standards andensure excellent performance and reliability1.Our non-blocking pump used for blocking or abrasion occasion that ordinary slurry  pump not available.2.Performance(Max parameter)Heads 90mCapacity 550l/s  Temperature 180℃

The concept for sealing water equipment meets all the requirements demanded by the pumped liquid or the shaft seal. All general pumping solutions can be covered by just four different options. Special materials to take into account corrosive environments ensure reliable operation in extreme circumstances.1. Our wear pump used for corrosion and  abrasion pumping occasion. Also well used for  anti-blocking occasion.2.

The mark 3 chemical system pump presents high-quality hydraulic overall performance, unrivaled reliability and coffee overall price of possession.

We support our customers with an  extensive range of pumping services,  from spare parts to remote monitoring. Additionally we offer various types  of service agreements in which spare  parts and service solutions can be  combined.1.Our wear pump used for corrosion and  abrasion pumping occasion. Also well used for  anti-blocking occasion.2.Performance(Max parameter)Heads 110mCapacity 2000l/s     Temperature 180℃All parts in contact with the pumped liquid can be produced from the same construction material as the pump casing.